Radio Shack 43-3595 important safety instructions When to RE-REGISTER Handsets

Page 12

Installation

Ô NOTES Ô

•If the extra handset’s battery becomes very low, the handset must be recharged for 15-20 hours and re-registered to the main base unit.

•Make sure to return the handsets to the cradles after each phone call.

2.After fully charging both batteries, remove the handset in the extra charging cradle and place it on the main base cradle. The LED light on the main base will begin to ﬂash, indicating that the registration is taking place between the extra handset and the main base.

3.Wait for at least ﬁve seconds before removing the handset from the main base.

Congratulations, the registration has been completed and your dual handset cordless phone is ready for use!

WHEN TO RE-REGISTER HANDSETS

1.You’ll need to re-register the extra handset (follow steps “Before Using, Register Extra Handset to the Main Base Unit” on page 11) each time the digital security code is changed. Refer to “Changing the Digital Security Code” on page 32 for details regarding the Digital Security Code. Ô

2.When there is a power failure for more than one hour, (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the registration process on “Before Using, Register Extra Handset to the Main Base Unit” on page 11.

12

Image 12

Contents MHz Cordless Telephone Introduction IntroductionInformation FCC StatementSurge Protection Important Safety Instructions Important Caller ID Information Installation Selecting a LocationInstalling the Charging Cradle On a Wall Plate or WallCONNECTING/CHARGING the Battery Pack Lift the battery pack out of the compartmentCHARGE/IN USE or Before USING, Register Extra Handset to Main Base Unit OWARNING oWhen to RE-REGISTER Handsets Call Transfer Feature To transfer a call to the second handsetOperation Making and Receiving CallsHandset Ringer Tone Volume Earpiece VolumeAdjusting the Handset Ringer and Earpiece Volume Tone Dialing SWITCH-OVER Temporarily Mute RingerRedial Traveling OUT of RangeSetting Menu Options Changing the Auto TalkFlash and Call Waiting Entering Your Area Code CidcwChoosing the Dialing Mode Memory DialingStoring Phone Numbers and Names DialPress CH/SEL. Store Number is displayed Memory 1 Stored Steps for Entering Names and Special Characters Memory Dialing from Standby Mode Memory Dialing from Talk ModeIf you make a mistake while entering a name Making Calls with Memory DialingChain Dialing Editing a Stored Name AND/OR Phone NumberErasing a Stored Name and Phone Number Testing Stored Emergency Numbers ONE-TOUCH Speed DialYes Storing and Editing the Speed Dial Making Calls with the Speed DialDeleting the Speed Dial Delete NumberWhen the Telephone Rings Caller IDViewing the Caller ID Message List Deleting Information from the Caller ID ListDeleting a Caller ID Message Deleting all Caller ID Names/ NumbersAll? or Delete Yes or NoLong Distance Calls and Area Code Setting/Cancellation Using the Caller ID ListCalling a Party from the Caller ID List Dial EditChanging the Digital Security Code Installing the Optional Beltclip Headset InstallationAdditional Information To attach the beltclipTroubleshooting Problem SolutionUnavailable message is Service and Repair CarePage Page Page RadioShack Corporation