#&,756+06*81.7, +0/55#5, 16124#6+10 | Radio Shack 43-3821 specs

DELETE. The

#&,756+0)"6*'"81.7/'

To adjust the speaker’s volume, repeatedly press VOL 8 or 9 on the base. The volume setting from & (lowest) to / (highest) appears.

&'.'6+0)"/'55#)'5

To delete the current message while it is playing, press DELETE. The system beeps.

To delete all messages, while messages are not playing, press DELETE. The system beeps and an- nounces, “To delete all messages, press DELETE again.” Within 30 seconds, press

system beeps, the display clears momentarily, then

&appears. ±ý

4'/16'"12'4#6+10

While you are away from your home or office, you can use a touch-tone phone, or a pulse (rotary) phone with a pocket tone dialer (available through RadioShack), to enter your security code and do any of the following:

•Set the system to answer or not answer calls.

•Listen to your messages.

•Record a new outgoing message.

•Record a memo.

•Erase messages. ±ý

5'66+0)"6*'"5'%74+6;"%1&'

The two-digit remote operation security code prevents unauthorized remote access to your messages. The code is preset to 80. To change the code to any number from 00 to 99:

1.Press MENU twice. The system announces “Security code,” followed by the currently set code. The code appears.

2.Repeatedly press or hold down 6or7to change the number, then press SET/RING to

±"016'"±"

Deleting Messages

You cannot delete new (unplayed) messages. If you try to delete all messages while you still have new messages, the system beeps and announces “Please play back all messages.”

Remote Operation

You cannot remotely operate the system using its handset or another telephone on the same line.

Answering System Operation