Radio Shack owner manual Storing Your Area Code, 7hW 9eZ

Follow these steps to turn the Caller ID/Call Waiting feature on or off.

1.Lift the handset and press FUNC.

2.Press 2 or VOL/CID 9 to select 9?:9M (Caller ID/Call Waiting).

3.Press SELECT/CH to change the Caller ID/Call Waiting setting. Ed, E\\, or Efj appears.

4.Press FUNC or return the handset to the base to store the new setting.

Note: Efj lets you use advanced Caller ID/ Call Waiting options (see “Call Waiting Op- tions Service” on Page 20).

STORING YOUR AREA CODE

You can store your local area code in the phone’s Caller ID record so it does not show (or dial) the area code if the received call is from your local area. If you need to dial the area code (or store it in memory), you can add it afterwards. See “Adding/Deleting the Area Code” on Page 22.

Note: If your calling area requires 10-digit di- aling including area code, do not enter the area code but leave this option blank.

Follow these steps to store your area code.

1.Lift the handset and press FUNC.

2.Press 3 or VOL/CID 9 twice to select

7h[W 9eZ[.

3.Press SELECT/CH, then enter your

three-digit area code. If you make a mis- take, repeatedly press ∗/TONE/6 or #/ 7 to move the cursor over the incorrect digit, then enter the correct number.

4.Press SELECT/CH to store the area code, then press FUNC or return the handset to the base to clear the display.

Note: If an area code is already stored, it appears on the display. To delete the area code, press SELECT/CH, press DEL three times, then enter your area code. Or, you can use ∗/TONE/6 or #/7 to move the cursor and edit the area code.

Installation 15