•subscribe to the Call Waiting Options Services from your telephone company
•set the Caller ID/Call Waiting feature to Opt (see “Turning Caller ID/Call Waiting On or Off” on Page 14).
Using Call Waiting Options
Note: An error tone sounds and the phone exits the menu mode if you wait more than 20 seconds between each keypress.
You hear a soft beep when a call comes in while you are already on the phone. The dis- play shows the caller name and phone num- ber.
Follow these steps to use Call Waiting Op- tions Services
1.Press FUNC. A list of several options, beginning with 7ia je >ebZ, appears.
2.Repeatedly press VOL/CID9to scroll through the options list. You can also press the number of the desired option.
3.Choose one of the following options, then press SELECT/CH.
7iaýjeý>ebZ (or press 1) — A waiting caller hears a prerecorded message stating that you will be available shortly and is put on hold. 9Wbbý>ebZ_d] appears.
J[bbý 8kioý (or press 2)— A prerecorded message indicates you cannot take a
call and the waiting call is disconnected.
JebZý8kio appears.
7dim[h%:hefý' (or press 3)— Disconnects the first call and automatically connects to the new caller. 7dim[h%:hefý 'ij appears.
9ed\[h[dY[ (or press 4)— Allows you to speak with your first and second callers to have a
:hefý<_hij (or press 5) and :hefýBWij (or press 6) are options you can only use during a conference call (see “Using Conference”).
Using Ask to Hold
When you select 7iaý jeý >ebZ, you can also use several of the other options.
1.If you decide you cannot end your first call and you do not want to continue to leave the second call on hold, press
FUNC, then repeatedly press VOL/ CID9to scroll down to J[bb 8kio or press 2 to tell the second caller that you are too busy to take the call.
Press SELECT/CH.
2.If you decide you want to take the sec-
ond call and end the first call, scroll down to 7dim[h%:hefý' or press 3.
Press SELECT/CH.
3.If you decide to include the second
caller in your conversation with the first caller, scroll down to 9ed\[h[dY[ or press
4.
Press SELECT/CH.
Using Conference
You can either begin a conference call as soon as you receive a second call, or after the second caller has been on hold for a while (see “Using Ask to Hold”). Once you have established a conference call, you can end it at any time by dropping one of the calls.
:hefý<_hij — Hang up on the first caller and continue with the second caller.
:hefý BWij — Hang up on the second caller and continue with the first caller.
Caller ID Operation | 21 |