Radio Shack ET-927 owner manual Using AN Optional Headset, Paging from the Handset to the Base

43-1097a.fm Page 18 Tuesday, August 31, 1999 10:01 PM

To answer a page at the handset, press INTCM. Begin your conversation after the INTCM indicator on the handset lights steadily.

Illus

To end an intercom call, press PAGE on the base or INTCM on the handset. All indicators turn off.

Paging from the Handset to the Base

To send a page from the handset to the base, press INTCM on the handset. The base sounds two short beeps, and auto- matically answers the handset’s page (whether or not anyone is there). Begin your conversation after the INTCM indi- cator lights steadily on the handset.

To end an intercom call, press PAGE on the base or INTCM on the handset. All indicators turn off.

USING AN OPTIONAL HEADSET

Your ET-927’s handset is equipped with a headset jack on top. This jack allows you to connect a headset for hands-free conversation — perfect for when you are working in the yard or garage. A handset holder carries the handset for you while you use the headset. (Headsets and handset holders are available at your lo- cal RadioShack store.)

Follow these steps to use a headset.

1.Place the ET-927’s handset in the handset holder.

illus of handset in holder

2.Insert the headset’s 3/32-inch (2.5 mm) plug into the jack on the top of the handset.

Illus

18