3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the strain relief slot on the base.
Strain Relief
Slot
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a verti- cal position.
Mounting the Base on a Wall Plate
1.Insert the two catches at the top of the bracket into the upper slots on the bottom of the base. Then press the two latches on the sides of the bracket into the lower slots.
2.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base.
6