Radio Shack ET-926 owner manual Fm Page 7 Tuesday, August 17, 1999 347 PM

Page 7

43-1096.fm Page 7 Tuesday, August 17, 1999 3:47 PM

3.Route the modular cord through the wide right groove on the bot- tom of the bracket.

AC ADAPTOR

DC IN 9V

PULSE-TONE

TEL LINE

4.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.

5.Route the adapter’s cord through the narrow groove on the bottom of the bracket.

AC ADAPTOR

DC IN 9V

PULSE-TONE

TEL LINE

6.Plug the short modular cord into the wall plate jack, press the excess cord into the slot in the center of the bracket, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it.

AC ADAPTOR

DC IN 9V

PULSE-TONE

TEL LINE

7.Plug the adapter into a standard AC outlet.

8.Lift the base’s antenna to a verti- cal position.

7

Image 7
Contents ET-926 Features FCC Statement Read this Before InstallationContents Selecting a Location InstallationPlacing the Base on a Desk Top Mounting the Base on a Wall Plate Fm Page 7 Tuesday, August 17, 1999 347 PM Mounting the Base Directly on the Wall Fm Page 9 Tuesday, August 17, 1999 347 PM Connecting and Charging the Battery Pack Setting the Dialing Mode Using the Belt Clip Setting the Ringer TONE/VOLUMEMaking Receiving Calls Setting the Handset VolumeUsing Redial OperationPaging Using FlashStoring a Number in Memory Memory DialingEntering a Pause Chain-Dialing Service NumbersDialing a Memory Number Testing Stored Emergency Numbers Troubleshooting Fm Page 19 Tuesday, August 17, 1999 347 PM Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowFm Page 23 Tuesday, August 17, 1999 347 PM RadioShack