6. Attach the sticker to the phone.
To erase a stored number, simply store a new number in its place.
Or, lift the handset, press TALK if the TALK/BATT LOW indicator lights, and press MEMO twice. Then press the memory location number
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you must also store a pause after the access code to allow the outside line time to connect. To do so, press REDIAL/P. Each press enters a
Dialing a Memory Number
To dial a number stored in memory, lift the handset or press TALK. The TALK/ BATT LOW indicator lights.
When you hear a dial tone, simply press MEMO and enter the memory lo- cation number for the number you want to dial.
Chain-Dialing Service
Numbers
When calling special services (such as alternate long distance or bank by phone), dial the service’s main number first. Then, at the appropriate place in the call, press MEMO and the number for the location where the additional in- formation is stored.
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department, fire de- partment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to ex- plain the reason for your call.
15