43-1086.fm Page 7 Tuesday, August 17, 1999 2:39 PM
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the slot on top of the base and through the left slots on the bot- tom of the base.
5.Plug the short modular cord into the wall plate jack.
6.Align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
7.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.
8.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
9.Lift the base’s antenna to a verti- cal position.
7