Radio Shack ET-910 owner manual Mounting Directly on the Wall

43-1085.fm Page 10 Tuesday, August 17, 1999 2:31 PM

Mounting Directly on the Wall

Using a drill (not supplied) and the supplied screws and spacers, you can easily mount your ET-910 direct- ly on the wall.

1.At the desired mounting loca- tion, drill two holes 315/16 inches apart, one above the other.

315/16”

2.Place a spacer over each screw, then thread a screw into each wall hole until the screw’s head extends about 1/4 inch from the wall.

3.Press the ET-910’s AC cord under the recessed clip directly below it on the bottom of the phone.

4.Plug one end of the supplied 7- foot modular cord into the TO TEL LINE jack, then press the cord under the other recessed clip on the bottom of the phone.

TO TEL. LINE

5.Insert the tabs on the supplied mounting bracket into the slots on the base’s bottom, then press the bracket down until it snaps into place.

10