Turning On/Off the Base’s Ringer

43-1085.fm Page 15 Tuesday, August 17, 1999 2:31 PM

2.Within 30 seconds, press #, then press 1-4(one key after the other) to hear the different ringer types. The ET-910 sounds a dif- ferent ringer type for each key.

Notes:

•To hear the currently selected ringer type, press 0 anytime after you press # during this step.

•If the indicator above TALK turns off before you make your selection, press PROG again then repeat this step.

3.When you hear the ringer type you want to use, press # to select it. The indicator turns off.

Repeat these steps using the other keypad to change the base or the handset’s ringer type.

If you want the ET-910’s base to ring when a call comes in, set RINGER to

ON.

			RINGER
PULSE TONE			ON OFF

If you do not want the base’s ringer to sound, set RINGER to OFF.

Turning On/Off the

Handset’s Ringer

The ET-910’s handset is preset to ring when a call comes in. To turn off the handset’s ringer, follow these steps.

1.Press PROG. The indicator above TALK flashes.

2.Within 30 seconds, press #, then

Note: If the indicator above TALK turns off before you com- plete this step, press PROG again then repeat this step.

3.Press # again. The indicator turns off and the handset ringer is now turned off.

Notes:

•To turn the handset’s ringer on again, simply follow the steps in “Checking/Setting the Ringer Type” on Page 14 and select the desired ringer type.

•If the handset’s ringer is turned on and you press OFF while the handset is ringing, the handset’s ringer turns off for that call only, then it automatically turns on about 5 seconds after the call ends. See “Making/Answering Calls” on Page 16.