Radio Shack ET-549, ET-536 owner manual Mounting the Base on a Wall Plate

43-1036.fm Page 6 Tuesday, August 17, 1999 9:52 AM

3.Route the adapter’s cord through the strain relief slot on top of the base.

4.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.

5.Plug the modular cord’s other end into a modular phone line jack.

6.Fully extend the base’s antenna and place it in a vertical position.

6

Mounting the Base on a Wall Plate

1.Plug one end of a short modular cord (such as Cat. No. 279-390, not supplied) into the TEL LINE jack on the back of the base.

2.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.