Radio Shack ET-549, ET-536 owner manual Paging, Memory Dialing, Storing a Number in Memory

43-1036.fm Page 14 Tuesday, August 17, 1999 9:52 AM

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps five times.

MEMORY DIALING

You can store up to 10 numbers in memory, then dial a stored number by pressing a one-digit memory location number.

Note: Each number you store can be up to 16 digits long.

14

Storing a Number in Memory

Note: An error tone sounds and the phone exits the programming mode if you wait more than 20 seconds be- tween each key press.

1.Lift the handset. If you hear a tone, press TALK to turn it off.

2.Press MEMO. The BATT LOW indicator blinks.

3.Enter the number and any TONE and PAUSE entries (see “Using Tone Services on a Pulse Line” on Page 13 and “Entering a Pause” on Page 15).

Note: Each TONE or PAUSE entry uses one digit of memory.

4.Press MEMO, then enter the mem- ory location number (0-9). A single tone sounds to indicate that the number is stored.

Note: If five quick beeps sound, you have made an entry error and the number was not stored. Start again from Step 2.