3.Route the modular cord through the top groove and the adapter cord through both grooves on the bottom of the base.
5.Plug the short modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
Top
Groove
Both
Grooves
4.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
6.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.
7.Fully extend the base’s antenna and place it in a vertical position.
7