USING TONE SERVICES ON A PULSE LINE
Some special services, such as bank by phone, require tone signals. If you have pulse service, you can still use these special tone services by follow- ing these steps.
1.Set TONE/PULSE on the base to
PULSE.
2.Dial the service’s main number.
3.When the service answers, press TONE. Then dial the additional numbers. The phone sends these numbers as tone signals.
4.When you complete the call, place the handset on the cradle or press TALK to disconnect the call. The phone automatically resets to the pulse mode.
Note: We recommend you not use RE- DIAL to dial numbers that include a TONE entry.
14
USING PAGE
PAGE lets you locate the handset if you misplaced it, or alert the person hold- ing the handset. The handset sounds four beeps when someone presses PAGE on the base. The IN USE indica- tor and the selected channel appear on the base’s display.
Note: The handset will not beep during a call, or if the ringer is off.