43-1046.fm Page 18 Tuesday, August 17, 1999 11:05 AM
Problem |
| Solution |
|
|
|
The handset’s range | • | Place the base’s antenna in a vertical position. |
decreases. | • | Be sure the antenna is not touching a metal |
| ||
|
| surface. |
| • Return the handset to the cradle, and recharge | |
|
| the battery. |
|
|
|
Receiver sound flutters or | • | Be sure the battery is connected and charged. |
fades. | • | Place the base’s antenna in a vertical position. |
| ||
| • | Move the handset closer to the base. |
|
|
|
Can make calls, but tele- | • | Handset’s RINGER must be set to ON to ring. |
phone does not ring. | • | Telephone company might be using unusual |
| ||
|
| ringing methods. Your telephone is designed |
|
| for standard straight line bridged ringing. |
|
| |
Can receive calls, but can- | Set TONE/PULSE correctly for the type of service | |
not make calls. | you have. | |
|
| |
You cannot answer/make a | The phone might be receiving interference from an- | |
call and the handset | other RF signal; or, if the handset is away from the | |
sounds an error tone when | base during a long period of AC power failure, the | |
you lift it from the base or | phone might lose its access protection code. Re- | |
press TALK. | turn the handset to the base for a few seconds. | |
|
|
|
18