Radio Shack ET-531 owner manual Using Tone Services with a Service Number

Page 13

43-1031.fm Page 13 Tuesday, August 17, 1999 9:24 AM

USING TONE SERVICES WITH A SERVICE NUMBER

Some special services, such as bank by phone, require tone signals. If you have pulse service, you can still use these special tone services by follow- ing these steps.

1.Set TONE/PULSE on the base to

PULSE.

2.Dial the service’s main number.

3.When the service answers, press

(S). Then dial the additional num- bers. The phone sends these numbers as tone signals.

4.When you complete the call, place the handset on the cradle or press TALK to disconnect the call. The phone automatically resets to the pulse mode.

Note: We recommend you not use RE- DIAL to dial numbers that include a TONE entry.

USING PAGE

PAGE lets you locate the handset if you misplaced it, or alert the person hold- ing the handset. The handset sounds four beeps when someone presses PAGE on the base. The IN USE indica- tor and the selected channel appear on the base’s display.

Note: The handset will not beep during a call, or if the ringer is off.

13

Image 13
Contents ET-531 Features FCC Statement Read this Before InstallationContents Installing the HANDSET’S Antenna Installing BatteryPreparation Selecting a LocationMounting the Base on a Wall Plate Placing the Base on a Desk TopMounting the Base Directly on the Wall Fm Page 8 Tuesday, August 17, 1999 924 AM Setting the Dialing Mode Charging BatterySetting the Ringer ON/OFF Using the Handset Away from the Base Using the Handset at the BaseOperation MAKING/ANSWERING a CallReducing Interference Using FlashRedial Using Using Tone Services with a Service NumberStoring a Number in Memory Memory DialingTesting Stored Emergency Numbers Chain Dialing Service NumbersEntering a Pause in a Memory Number Dialing a Stored NumberProblem Solution TroubleshootingFm Page 17 Tuesday, August 17, 1999 924 AM Care and Maintenance FCC Wants YOU to Know Replacing BatteryLightning Radio Shack Limited Warranty