MEMORY DIALING
You can store up to 10 phone numbers for
Notes:
•If TONE/PULSE is set to PULSE and you want to use tone dialing for a memory number, you must store the tone entry (S) along with the number.
•To keep your accounts secure, we recommend you not store your personal access code for services such as
Storing a Number in Memory
1.If necessary, press TALK on the handset so the IN USE indicator turns off.
2.Press MEMORY.
Note: While you are storing a number in memory, if you do not press any button within 10 sec- onds, you must repeat Step 2 and try again.
3.Dial the number you want to store.
14
4.Press MEMORY again.
5.Press the memory location num- ber (0 to 9) where you want to store the number. A long beep sounds. The phone number is now stored in memory.
6.Remove the plastic covering from the handset’s index card with a small pointed object, such as the end of a straightened paper clip. Write the person’s or company’s name and memory location num- ber on the card in pencil (in case you want to change it later).
7.Repeat Steps
Notes:
•If you receive a call while you are storing a number in memory, press TALK to answer the call. After the call, begin again at Step 1 to store the number.
•To change a phone number stored in memory, simply store a new phone number in that position.
•To clear a memory position so no number is stored in it, press MEM- ORY twice, then press the memory location number. A long beep sounds. The phone number is now cleared from memory.
Note: A fast beeping pattern indicates that your clearing was unsuccessful. Try the process again.