Radio Shack ET-532 owner manual Preparation, Installing Battery, Charging Battery

Page 7

43-1032.fm Page 7 Tuesday, August 17, 1999 9:41 AM

PREPARATION

INSTALLING THE

BATTERY

Before you use your phone for the first time, you must install and charge the battery.

To install the battery, slide off the bat- tery compartment cover on the back of the handset, connect the battery’s plug to the pins inside the compartment, and place the battery inside the com- partment.

Replace the cover, then follow the in- structions under “Charging the Bat- tery.”

CHARGING THE

BATTERY

When you install a new battery, set POWER to OFF. Then place the hand- set on the cradle so the CHARGE/ TALK indicator lights and let the bat- tery charge for about 15 hours.

When on the handset lights, re- charge the battery. To avoid damage to the battery, always recharge the handset before battery power grows

too weak to light

.

Notes:

You can set POWER to ON while the battery charges.

7

Image 7
Contents ET-532 Features Fm Page 3 Tuesday, August 17, 1999 941 AM FCC Statement Read this Before InstallationContents Installing the Phone InstallationSelecting a Location Charging Battery Installing BatteryPreparation Setting the Dialing Mode MAKING/ANSWERING a Call Using the Handset At the BaseUsing the Handset Away from the Base OperationUsing Flash Using RedialReducing Interference Memory Dialing UsingStoring a Number in Memory Dialing a Stored Number Entering a Pause A Memory NumberChain Dialing Testing Stored Emergency NumbersSolutions TroubleshootingSolution Care and Maintenance FCC Wants YOU to Know Replacing BatteryLightning Radio Shack