EN47
USING THE REMOTE CONTROL UNIT
1
1
3
2
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. This remote control unit makes
additional playback functions possible.
Installing The Battery
The remote control uses one lithium battery
(CR2025).
1

PULL OUT BATTERY HOLDER

Pull out the battery holder while pressing the
knob as shown.
2

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to
have the “+” mark visible.
3

RE-INSERT HOLDER

Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(Z pg. 2).
Knob
5m
30°
30°
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
Transmitted beam
effective area
Remote sensor