JVC LYT0244-001A, GR-DVF20 manual Date/Time Settings, EN11

MENU Button

Power lamp

Select Dial Power Switch

	Display
REC MODE		SP	Recording Menu
WIDE MODE		OFF
ZOOM		64X
GAIN UP		AGC
TELE MACRO		OFF
4TO DATE / TIME MENU
TO SYSTEM MENU
		DEC 25 ’ 98
		: 30
END	– – – – –6– – – – –

Date/Time Menu

	ON SCREEN	OFF
	DISPLAY	ON
4	DATE / TIME	DEC 25	’ 98
		PM 5	: 30

RETURN

EN11

Date/Time Settings

Date and time will automatically be recorded on tape at all times. It is your choice to display it or not during playback (☞ pg. 43).

	SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.		STARTED
	•The power lamp comes on and the camcorder is
	turned on.
		GETTING
	ACCESS DATE/TIME MENU
	ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears.
3
	Move the highlight bar to “TO DATE/TIME MENU”
	by rotating the Select Dial. Press the Select Dial and
	the Date/Time Menu appears.
	INPUT DATE AND TIME
4 Move the highlight bar to “DATE/TIME” by rotating
	the Select Dial. Press the Select Dial and “month” is
	highlighted and begins blinking.
	Rotating the Select Dial, input the month. Press the
	Select Dial. Repeat the procedure to input the day,
	year, hour and minute.

•Press the Select Dial twice when the highlight bar is set to “RETURN” to exit.

NOTE:

Even if you select “DATE/TIME”, if the parameter is not highlighted the camcorder's internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (month), the clock stops. When you finish setting the minute and press the Select Dial, the date and time begin operation from the date and time you just set.