JVC LYT0244-001A, GR-DVF20 manual After Use, Clean Exterior, Clean LCD Monitor, Clean Lens

Turn the LENS COVER Open/Close Ring to close the lens cover.

Press “PUSH HERE” to close the cassette cover.

Set the Power Switch to “POWER OFF” to turn off the camcorder.

USERMAINTENANCE

LENS COVER Open/Close Ring

	BATTERY RELEASE
Set to “POWER OFF”.
Monitor Open	PUSH HERE
Button

EN63

After Use

1

2 Press the Monitor Open Button and open the LCD monitor to an angle over 45 degrees. Press OPEN/ EJECT in the direction of the arrow then swing the cover open until it locks. The cassette holder opens automatically. Remove the cassette.

3

4 Close and lock the LCD monitor.

5 Slide BATTERY RELEASE to remove the battery pack.

6

Cleaning The Camcorder

1

Remove.

OPEN/EJECT

2

CLEAN EXTERIOR

Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

CLEAN LCD MONITOR

Open the LCD monitor and wipe gently with soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 CLEAN LENS

Blow it with a blower brush, then wipe gently with lens cleaning paper.

4

5

6

REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

CLEAN VIEWFINDER

Remove dust using a blower brush.

RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth refer to the cautions of each product.

●When removing the eyepiece, be sure to hold the viewfinder securely.