Radio Shack TRC-237 owner manual Testing the Battery Power

Page 10

21-1650.fm Page 10

Thursday, August 5, 1999 11:43 AM

Testing the Battery Power

1.Turn on the TRC-237 by rotating OFF/VOLUME clockwise until it clicks.

2.Hold down BATT TEST. If the indica- tor lights, there is enough battery power to operate the CB. If the indi- cator is dim or does not light, replace or recharge the batteries.

Recharging Nickel-Cadmium Batteries

You can use a battery charger, Cat. No. 23-249 (not supplied), to charge or re- charge nickel-cadmium batteries while they are inside the TRC-237’s battery compartment.

Do not use the TRC-237 while you are charging the nickel-cadmium batteries.

Cautions:

Use only the recommended battery charger to recharge the batteries in the TRC-237. Other chargers could damage your TRC-237 or the batter- ies.

Be careful not to overcharge nickel- cadmium batteries.

To prevent damage to rechargeable nickel-cadmium batteries, never charge them in an area where the temperature is above 90°F (32°C) or below 40°F (4.5°C).

10

Image 10
Contents TRC-237 Features PLL Phase-Locked-Loop FrequencyDigit LED Display lets you easily Battery Test Button and Battery IndicaFlexible Antenna with BNC Connector Automatic Noise Limiter ANL CircuitFCC Information Contents Powering the CB Using the Power Jack and ALKALINE/NI-CD SwitchUsing Batteries Fm Page 8 Thursday, August 5, 1999 1143 AM Fm Page 9 Thursday, August 5, 1999 1143 AM Testing the Battery Power Thursday, August 5, 1999 1143 AM Using Vehicle Battery Power Using AC Power Thursday, August 5, 1999 1143 AM Connecting Antenna Connecting an Optional Antenna Thursday, August 5, 1999 1143 AM Receiving Transmissions Adjusting Squelch OperationThursday, August 5, 1999 1143 AM Transmitting CB Operation Tips Common Uses for a CB RadioUsing Common 10-CODES Code MeaningCode Meaning CB Courtesy Maximum RangeTroubleshooting Symptom SuggestionMaintenance Specifications ReceiverLimited Ninety-Day Warranty