Radio Shack TRC-237 owner manual Thursday, August 5, 1999 1143 AM

Page 11

21-1650.fm Page 11

Thursday, August 5, 1999 11:43 AM

Follow these steps to charge nickel- cadmium batteries in the TRC-237.

1.If the TRC-237 is on, turn OFF/VOLUME fully counterclockwise until it clicks to turn it off.

2.Set ALKALINE/NI-CDinside the bat- tery compartment to NI-CD(see “Us- ing the Power Jack and ALKALINE/ NI-CD Switch” on Page 6).

3.Connect the battery charger’s 5.5 mm outer diameter./2.1 mm inner diameter barrel plug to the POWER jack on the side of the TRC-237, then plug the battery charger’s plug into a standard AC outlet.

It takes about 24 hours to charge new or fully discharged nickel- cadmium batteries. Subsequent charges take about 16 to 18 hours.

4.When charging is complete, unplug the battery charger’s plug from the AC outlet. Then disconnect the bat- tery charger’s barrel plug from the

POWER jack.

5.If the TRC-237 is on, turn OFF/VOLUME fully counterclockwise until it clicks to turn it off. Then set ALKALINE/NI-CD to ALKALINE.

11

Image 11
Contents TRC-237 PLL Phase-Locked-Loop Frequency FeaturesAutomatic Noise Limiter ANL Circuit Battery Test Button and Battery IndicaFlexible Antenna with BNC Connector Digit LED Display lets you easilyFCC Information Contents Using the Power Jack and ALKALINE/NI-CD Switch Powering the CBUsing Batteries Fm Page 8 Thursday, August 5, 1999 1143 AM Fm Page 9 Thursday, August 5, 1999 1143 AM Testing the Battery Power Thursday, August 5, 1999 1143 AM Using Vehicle Battery Power Using AC Power Thursday, August 5, 1999 1143 AM Connecting Antenna Connecting an Optional Antenna Thursday, August 5, 1999 1143 AM Operation Receiving Transmissions Adjusting SquelchThursday, August 5, 1999 1143 AM Transmitting Common Uses for a CB Radio CB Operation TipsCode Meaning Using Common 10-CODESCode Meaning Maximum Range CB CourtesySymptom Suggestion TroubleshootingMaintenance Receiver SpecificationsLimited Ninety-Day Warranty