Radio Shack TRC-237 owner manual Thursday, August 5, 1999 1143 AM

Page 17

21-1650.fm Page 17

Thursday, August 5, 1999 11:43 AM

Follow the installation instructions sup- plied with the antenna, route the antenna cable to the TRC-237, then connect it to the antenna jack.

Cautions:

Do not run the cable over sharp edges or moving parts.

Do not run the cable next to power cables or other CB antenna cables.

Do not run the cable through a vehi- cle’s engine compartment or other areas that produce extreme heat.

Follow all cautions and warnings included with the antenna.

Warning: When installing or removing a base station CB antenna, use extreme caution. If the antenna starts to fall, let it go! It could contact overhead power lines. If the antenna touches the power line, contact with the antenna, mast, cable or guy wires can cause electrocution and death! Call the power company to remove the antenna. DO NOT attempt to do so yourself.

17

Image 17
Contents TRC-237 PLL Phase-Locked-Loop Frequency FeaturesFlexible Antenna with BNC Connector Battery Test Button and Battery IndicaDigit LED Display lets you easily Automatic Noise Limiter ANL CircuitFCC Information Contents Using the Power Jack and ALKALINE/NI-CD Switch Powering the CBUsing Batteries Fm Page 8 Thursday, August 5, 1999 1143 AM Fm Page 9 Thursday, August 5, 1999 1143 AM Testing the Battery Power Thursday, August 5, 1999 1143 AM Using Vehicle Battery Power Using AC Power Thursday, August 5, 1999 1143 AM Connecting Antenna Connecting an Optional Antenna Thursday, August 5, 1999 1143 AM Operation Receiving Transmissions Adjusting SquelchThursday, August 5, 1999 1143 AM Transmitting Common Uses for a CB Radio CB Operation TipsCode Meaning Using Common 10-CODESCode Meaning Maximum Range CB CourtesySymptom Suggestion TroubleshootingMaintenance Receiver SpecificationsLimited Ninety-Day Warranty