Radio Shack ET-652 owner manual Operation, Making and Answering Calls, Setting the Volume

MAKING AND ANSWERING CALLS

To place a call, press the line button for an available line. Then, lift the handset, or press SPEAKER to use the speaker- phone, and dial as you would with any other phone.

SETTING THE VOLUME

Set the volume control on the handset to a comfortable level (usually LO).

Slide VOLUME on the right side of the phone toward MIN or MAX to set the speakerphone’s volume.

MIN

SPEAKER

MIN

When you receive a call, that line’s indi- cator flashes. To answer the call, press the line button (LINE 1 or LINE 2) below the flashing indicator and lift the handset or press SPEAKER.

Line Indicator

The ring for Line 2 has a lower pitch than the ring for Line 1. This helps you tell which line is ringing.

To end a call, hang up the handset or press SPEAKER.

Note: The ET-652 uses voice-operated keying, so both parties cannot speak at the same time when you use the speak- erphone.

SWITCHING BETWEEN THE HANDSET AND THE SPEAKERPHONE

To switch from the handset to the speakerphone during a call, press SPEAKER, then place the handset on the base.

To switch from the speakerphone to the handset, just lift the handset. The speak- erphone automatically turns off.

11