Connecting the Handset

43-652.fm Page 6 Friday, August 13, 1999 11:00 AM

• The USOC number of the two-line	Note: If you use the ET-652 with only
jack to be installed is RJ14C	one line, set LINE 2 DEFEAT on the back
(RJ14W for a wall plate). The USOC	of the phone to OFF. This turns off Line
number of a single-line jack is	2’s status indicator.
RJ11C.

ADJUST			LINE 2 DEFEAT
LINE 1 LINE 2			OFF - ON

DC 9V

TEL LINE

Plug one end of the supplied two-line telephone cord into the jack on the back of the phone. Then plug the cord’s other end into a modular telephone line jack.

LINE

E	MAX
VOLUM

MIN

MODE	-	STORE
NORM

				2	-	TONE
			- LINE		PULSE
		R		HI
		RINGE		LO
LINE	1-	OFF
LINE	LO	HI
OFF

If you use two single-line jacks, you must connect the lines with an optional two-line coupler (such as RadioShack Cat. No. 279-401).

Two-line

Coupler

MODE	- STORE
NORM

2	- TONE
- LINE	PULSE

		RINGER		LO
				HI
	1-		OFF
LINE	LO HI
OFF

Plug the supplied coiled handset cord into the jacks on the handset and the left side of the phone.

Note: Your local RadioShack store sells a variety of longer coiled handset cords, which are especially useful when you mount the phone on the wall.

Radio Shack ET-652 owner manual Connecting the Handset

Connecting the Handset