USING TONE SERVICES ON A PULSE LINE
Some special services, such as
1.Be sure MODE is set to PULSE.
2.Call the service’s main number.
3.When the service answers, press 
. Any additional numbers you dial are sent as tone signals.
MODE | - | STORE |
NORM |
|
|
2 | - | TONE |
- LINE | PULSE |
|
|
| RINGER | HI | |
|
|
|
| LO |
| 1- |
| OFF |
|
LINE | LO HI |
|
| |
OFF |
|
|
|
|
VOLUME | MAX |
|
MIN
4.When you hang up, the phone auto- matically resets to pulse mode.
MEMORY DIALING
You can store up to 20 phone numbers and names in memory, then dial a stored number by entering a
1.Set NORM/STORE on the right side of the phone to STORE.
MODE | - | STORE |
NORM |
|
|
2 | - | TONE |
- LINE | PULSE |
|
|
| RINGER | HI | |
|
|
|
| LO |
| 1- |
| OFF |
|
LINE | LO HI |
|
| |
OFF |
|
|
|
|
VOLUME | MAX |
|
MIN
2.Press the line button for an available line.
3.Lift the handset or press SPEAKER, then press MEMORY.
MODE | - | STORE |
NORM |
|
|
2 | - | TONE |
| ||
- LINE | PULSE |
|
|
| RINGER | HI | |
|
|
|
| LO |
| 1- |
| OFF |
|
LINE | LO HI |
|
| |
OFF |
|
|
|
|
VOLUME | MAX |
|
MIN
4.Set VOLUME to the middle setting, then enter the number and any tone and pause entries (see "Using Tone Services on a Pulse Line" on this page and “Entering a Pause” on Page 14).
Note: Each tone or pause entry us- es one digit of memory.
5.Press MEMORY, then enter a two- digit memory location number (01– 20).
6.To store additional numbers, press MEMORY again, then repeat Steps 4 and 5.
13