Telephone Operation, Using Redial | Radio Shack TAD-759 instruction

TELEPHONE OPERATION

Place and answer phone calls with the TAD-759 as you would with any stan- dard phone.

SETTING THE RINGER’S VOLUME

To change the ringer’s volume, set the ringer volume switch on the back of the base to LO for a normal ringer volume, or HI for a louder ring.

If you do not want the ringer to sound, set the ringer volume switch to OFF. You can still make calls with the ringer off, and you can answer calls if you hear an- other phone on the same line ring.

USING REDIAL

To quickly dial the last number dialed, lift the handset and press REDIAL.

Note: The redial memory stores 31 tone digits or 32 pulse digits.

ADJUSTING THE HANDSET’S VOLUME

The TAD-759 has three volume levels. To adjust the volume you hear through the handset, slide HANDSET VOLUME HI/ MED/LO to the desired volume during a call.

USING FLASH

Use FLASH to perform the switchhook operation for special services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to take an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have special phone services, pressing FLASH might discon- nect the current call.