Read this Before Installation, FCC Statement

READ THIS BEFORE INSTALLATION

We have designed your TAD-759 to conform to federal regulations, and you can connect it to most telephone lines. However, each device you connect to the phone line draws power from the line. This power draw is the device’s ringer equivalence number, or REN. The REN is on the bottom of the TAD.

If you use more than one telephone or other device on the line, add up all of the RENs. If the total is more than five, your telephones might not ring. In rural areas, a total REN of three might impair ringer operation. If ringer operation is impaired, remove a device from the line.

FCC STATEMENT

Your TAD complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are marked on the bottom of the TAD.

Note: You must not connect the TAD to:

•coin-operated systems

•party-line systems

•electronic key telephone systems

Your TAD complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits pro- vide reasonable protection against ra- dio and TV interference in a residential area. However, your TAD might cause TV or radio interference even when it is operating properly. To eliminate interfer- ence, you can try one or more of the fol- lowing corrective measures:

•Reorient or relocate the receiving antenna of the radio or TV antenna.

•Increase the distance between the TAD and the radio or TV.

•Use outlets on different electrical cir- cuits for the TAD and the radio or TV.

Consult your local RadioShack store if the problem still exists.