Radio Shack TAD-716 owner manual Remote Message Erase

Page 19

After 5 seconds, the TAD-716 sounds a single long beep. You can leave a remote memo (up to 1 minute) or enter your three-digit security code to replay the incoming messages again.

3.To end playback, simply hang up. All messages are automatically saved and the TAD-716 resets itself to answer the next incoming call.

Note: You cannot use this feature when calling in from a rotary or push-button pulse dial phone without a pocket tone dialer. Also, some touch-tone phones only output tones for a fraction of a second. If you have difficulty with remote operation, try another phone, or use a pocket tone dialer.

REMOTE MESSAGE ERASE

After playing all messages, the TAD-716 sounds a series of beeps.

Enter your three-digit security code within 5 seconds after the beeps. After 2 short beeps sound, hang up. All mes- sages are automatically erased and the TAD-716 resets itself to answer the next incoming call.

19

Image 19
Contents TAD-716 Risk of Electric Shock Do not Open One Button Operation easy to use FeaturesPage FCC Statement Read this FirstContents Selecting a Location PreparationLoading the Cassette Page Connecting Power Recording the Outgoing Message Connecting to the Phone Line Basic Operation Screening Calls To Pause During Playback Playing MessagesTo Fast-Forward During Playback Saving MessagesResetting the TAD-716 Power Failure ProtectionRemote Security Code Remote OperationRemote Activation Remote Message Playback Remote Message Erase Toll Saver Problem Solution TroubleshootingProblem Solution Problem Solution Care and Maintenance Cleaning the TAPE-HANDLING Parts Lightning FCC Wants YOU to KnowPage RadioShack