Radio Shack TAD-716 owner manual Connecting Power

Page 9

CONNECTING POWER

1.Plug the supplied AC adapter into a standard AC out- let.

2.Rotate VOLUME counterclockwise until it clicks to turn on the TAD-716.

The message indicator turns on while the TAD-716 checks for an outgoing message.

If an outgoing message is already recorded, the TAD-716 automatically plays it back. If there is no outgoing mes- sage, the TAD-716 sounds a beep every 5 seconds until you record a message (see “Recording the Outgoing Message” on Page 10).

Note: If the cassette tape is broken or is not inserted properly, the TAD-716 sounds a continuous low tone when it is connected to power. To stop the tone, unplug the adapter from the AC outlet. Reinsert or replace the tape, then plug the adapter back into the AC outlet.

9

Image 9
Contents TAD-716 Risk of Electric Shock Do not Open One Button Operation easy to use FeaturesPage FCC Statement Read this FirstContents Preparation Selecting a LocationLoading the Cassette Page Connecting Power Recording the Outgoing Message Connecting to the Phone Line Basic Operation Screening Calls To Pause During Playback Playing MessagesTo Fast-Forward During Playback Saving MessagesResetting the TAD-716 Power Failure ProtectionRemote Operation Remote Security CodeRemote Activation Remote Message Playback Remote Message Erase Toll Saver Problem Solution TroubleshootingProblem Solution Problem Solution Care and Maintenance Cleaning the TAPE-HANDLING Parts Lightning FCC Wants YOU to KnowPage RadioShack