Adjusting the Volume
Press VOLUME 
to increase the volume and 
to decrease the volume of the system speaker. The system beeps each time you press VOLUME 
or 
so you can hear the selected level.
Setting the Day and Time
You must set the day and time so the system records the cor- rect day and time of each incoming message and memo.
Notes:
•When you press 
/TIME CHECK/REPEAT, the system announces “Please set time” until you set the day and time.
•The day/time voice stamp automatically defaults to Mon- day, 12:00 AM, when you connect the system to power. The clock will not run if you do not set it after you turn on the system.
•If you do not press a button for more than 8 seconds between steps, the system exits the setup mode. Start over at Step 1.
1.Press ON/OFF/STOP to turn on the system.
2.Press 
/TIME SET/SKIP. The system announces “Mon-
day.” Repeatedly press 
/TIME SET/SKIP until you hear the correct day.
3.Press 
/TIME CHECK/REPEAT. The system announces
“Twelve.” Repeatedly press 
/TIME SET/SKIP until you hear the correct hour.
Answering System | 23 |