ClearOne comm CHAT 150 user manual Using Chat, LED Indicators, Volume UP/DOWN and Mute Buttons

Page 33

CHAPTER 4: USING CHAT 150

LED INDICATORS

The three microphone LED indicators illuminate blue when the Chat 150 microphones are unmuted. The indicators illuminate red when the Chat 150 microphone mute function is active. The seven volume LED indica- tors illuminate blue to indicate the current volume setting--more lights indicate higher volume.

VOLUME UP/DOWN AND MUTE BUTTONS

Use the Volume Up/Down buttons (indicated by a large dot and a small dot) to adjust the volume level of the Chat 150. Holding down either button continuously will change the volume rapidly. Use the Mute button to mute the Chat 150’s microphone until the Mute button is pressed again. If you are using the Chat 150 with a PC, you can also use the Volume Control in Windows or the Chat software to make these adjustments.

>Note: If your Chat 150 is connected to a PC, any changes you make to volume by pressing the Chat 150’s buttons are reflected in the Speaker Volume Control in Windows and in the Chat software.

PHONE BREAKOUT BOX

Press the Headset button on the phone breakout box to send audio from your phone to your headset connect- ed to the Chat 150 Breakout Box. This will also disable audio going from the Breakout Box to the Chat 150 - it is only routed to the headset The phone breakout box LED indicator illuminates green, indicating that headset audio is activated. The Chat 150 LED indicators remain lit, although audio is not routed to the Chat 150 from the Breakout Box (USB audio is still active). Press the Headset button again to disable headset audio and reactivate audio from the Breakout Box to the Chat 150.The green LED dims out to indicate the change.

VC BREAKOUT BOX

Once you have properly connected the Chat 150 VC Breakout Box to your video conferencing device and TV using the included RCA Connection Cable, all settings changes such as mute, microphone and speaker level adjustments, etc., are controlled through the Chat 150 software. The Breakout Box itself has no buttons and no functionality for making settings changes. The green LED indicates that the device has power.

30Technical Services: 800.283.5936

Image 33
Contents USER’S Manual Table of Contents Recovering from an Interrupted Firmware Update Service and Support IntroductionProduct Overview Important Safety Information Unpacking Chat 150 ConfigurationsGetting Started Connecting Chat 150 to a TelephoneGetting Started Technical Services Click the Device Setup button on the Chat software Figure Connecting Chat 150 to a Video Conferencing Device, Step Connecting Chat 150 to a Video Conferencing DeviceOUT 12 Connecting Chat 150 to a Video Conferencing Device, Step 13 Connecting Chat 150 to a PC 16 Connecting Chat 150 to a PC Connecting Chat 150 to a PCInstalling Chat 150 Software Using Chat 150 Configuration SoftwareClick Next. The License Agreement screen appears Figure Using Chat 150 Configuration Software Technical Services ClearOne Chat Information Screen 11 Device Setup Screen Device Setup12 My Devices Screen MY DevicesCheck for Updates Automatic Updates Update Firmware & Database14 Update Screen Ready to Update 16 Update Warning Dialogs Select File Manual Firmware Update Advanced HelpAudio settings are as follows Advanced Database Using Chat 150 Configuration Software 25 Edit Database Record Dialog Click Clear to clear all entries in the log window LED Indicators Using ChatVolume UP/DOWN and Mute Buttons Phone Breakout BOXMaintenance TroubleshootingCaring for Your Chat Recovering from AN Interrupted Firmware Update Appendix SpecificationsCompliance Warranty