GE 27950, 27951 manual Base Station, Correctly orientated in a vertical or floor mount position

Base Station

1.Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop

NOTE: Model 27950 may also be wall mounted.

Model 27951

Model 27950

2.Plug one end of the telephone line cord into the TEL LINE jack on the base and the other end into a modular jack.

3.Plug the AC power adaptor into the electrical outlet and the DC connector into the jack on the bottom/back of the base.

CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2757 power adaptor listed in the user’s guide. This power adaptor is intended to be

correctly orientated in a vertical or floor mount position.

Note: If you subscribe to DSL service through your telephone line you will need to connect a DSL filter between your phone and the wall jack (refer to DSL Filter Installation section for more detail).

4.Place the handset in the base cradle. The charge/in use indicator turns on, verifying the battery is charging.

5.Allow the phone to charge for 14 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised.

13