Setting Up the User Menu
NOTE: You should not plug the telephone into the modular jack while setting up the User Menu.
1.Press the MENU button, to access the menu feature configuration mode.
#1. >ENG FRA ESP (Default English)
#2. CONTRAST (default level is 3).
#3. LOCAL AREA CODE
2.Press the MENU button to scroll through the 3 menu screens.
3.Use the CID (P or Q) buttons to select the desired setting.
NOTE: You have 20 seconds following an entry before the phone returns to the Summary Screen.
4.Plug one end of the telephone line cord into the LINE jack at the back of the base and the other end into a modular jack.
5.If you have another device (example, an additional auxiliary phone or data modem) need to be connected to the unit, please connect it to the DATA jack on the back of the unit.
The unit is properly installed if you pick up the handset and hear the dial tone. If you don’t hear a dial tone recheck all the installation steps.
16