GE 25983xx2, 0005467, 25983xx3 manual Chain Dialing from Memory, Handset, Base

1.Make sure the phone is OFF (not in TALK mode).

2.Press the memory button.

3.Press the desired memory location button (0-9), or use the caller id (9 or :) button to scroll to the desired telephone number.

4.Press the speaker/call back button. The number dials automatically.

Chain Dialing from Memory

Use this feature to make calls that require a sequence of numbers, such as a frequently used long distance card number. The following example shows how you can store each part of the long dialing sequence and use chain dialing to make a call through a long distance service provider:

The Number For	Memory Location
Long Distance Access Number	7
Authorization Code	8
Frequently called long distance number	9

Handset:

Make sure the phone is ON.

1.Press mem/conference and then press 7.

2.When you hear the access tone, press mem/conference and then press 8.

3.At the next access tone, press mem/conference and then press 9.

Base:

Press the speaker/call back button, or lift the corded handset.

1.Press memory and then press 7.

2.When you hear the access tone, press memory and then press 8.

3.At the next access tone, press memory and then 9.

TIP: Wait for the access tones before pressing the memory button or your call might not go through.

31