GE 15-Feb manual Hold Button, Memory Dialing

Page 11

REDIAL BUTTON

Redial the last number you called by pressing the REDIAL button after you get a dial tone.

NOTE: The Redial feature holds in memory the last phone number you dialed (as many as 32 digits). If you pressed any numbers after dialing the phone number, (for example, when accessing a voice-menu system) those numbers also are redialed.

HOLD BUTTON

Use the HOLD button to interrupt a phone conversation without hanging up, and then pick up the conversation again on the same phone or any extension.

NOTE: When hold is on, the HOLD indicator light is active.

USING HOLD WITH THE HANDSET

1Press HOLD (the indicator light comes on).

2Hang up (the indicator light blinks).

3Pick up the handset , press SPEAKER, or pick up an extension phone to release hold (the indicator light turns off).

USING HOLD WITH THE SPEAKERPHONE

1Press HOLD (the speakerphone indicator light turns off, and the hold indicator light blinks).

2Press SPEAKER, pick up the handset or an extension phone to release hold.

MEMORY DIALING

Store as many as 12 numbers in memory for easy dialing. Three can be stored in the Emergency Quick Dial locations, and nine additional numbers can be stored in the numbered keys (1-9).

12 MEMORY SPEAKERPHONE

16

27

38

49

5

AREA CODE PHONE NUMBER

 

EMERGENCY QUICK DIAL

FLASH STORE REDIAL

MEM DIAL

9

Image 11
Contents Speakerphone Hearing AID Compatibility Important InformationIntroduction Table of ContentsBefore YOU Begin Installation and SET UPParts Checklist Installing the 9V battery Desk or Tabletop Installation Wall Mount Installation Speakerphone Location Using the SpeakerphoneSpeakerphone USE Temporary Tone Feature Using the FeaturesVolume Controls Memory Dialing Hold ButtonEmergency Quick Dial Dialing a Number from Memory Troubleshooting Guide REN Number Care and MaintenanceTelephone Network Information Interfererence InformationIndex SymbolsService