Troubleshooting Guide

Problem	Solution
No dial tone.	• Check hook switch to make
Won't dial out	sure it pops up.
	• Make sure speakerphone indicator comes
	on (if using speakerphone.)
	• Make sure TONE/PULSE is set to correct
	position.
	• Unplug the phone, wait 30 seconds, and
	plug the phone back in.

Phone doesn’t ring	• Check RINGER VOLUME.
	• Could have too many phones on one
	line. (The total LN of all phones should
	not be greater than the maximum LN
	for your calling area, Usually 5.)

Low handset or	• Check the volume settings (see p. 8).
speaker volume

Light and tone	• This is normal as power is fluctuating
feedback flutter when	with phone outpulsing.
dialing in PULSE mode.

Can’t be heard by	• Make sure phone cord is securely
other party	plugged in.
	• Make sure MUTE indicator is off.

Memory dialing	• Make sure you entered numbers
	correctly. (See "Memory Dialing.")