Speakerphone USE

Note the following guidelines when using the speakerphone:

•The speakerphone works similar to a two-way radio in that you can only listen or talk at one time.

•Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are talking.

•You can adjust the speaker volume by sliding the VOLUME control on the right side of the base unit.

•The speakerphone indicator light comes on when the speakerphone is in use.

MAKING A CALL

1Press the SPEAKER button instead of picking up the handset.

2Adjust volume if needed.

3Make your call.

4Press SPEAKER again to hang up the phone.

RECEIVING A CALL

Make sure that the RINGER switch is set to HI or LOW or the phone will not ring.

1Press the SPEAKER button instead of picking up the handset when the phone rings.

2Adjust volume if needed.

3Press SPEAKER again to hang up the phone.

SWITCHING BETWEEN SPEAKER AND HANDSET

You can switch between speakerphone and handset while the phone is dialing a number, or anytime during a conversation.

•Speaker to Handset — Pick up the handset.

•Handset to Speaker — Press SPEAKER, then hang up handset.

TIP: If you’re using the speakerphone in a noisy environment and are in listening mode, you can improve the listening perfor- mance by pressing MUTE. Just be sure to press MUTE again before you try to speak.