GE 25203 manual Troubleshooting Guide

Page 32

Other Information

Troubleshooting Guide

No dial tone

•Check or repeat installation steps:

Make sure the telephone line cords are connected to the phone and the wall jack. Make sure the cords are not damaged .

•Make sure the hook switch pops up when the handset is lifted .

•Check the Speaker button. Is the indicator Off?

•Disconnect the phone from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local service.

You cannot be heard by the other party.

•Make sure the handset or headset cord is connected properly and securely.

•Make sure Mute is not activated.

Phone does not ring.

•Make sure the ringer is activated.

•You may have too many extension phones on your line. Try unplugging some phones.

•See solutions for “No dial tone.”

•Make sure Do Not Disturb is not activated.

Incoming voice too low or none at all.

•Check and adjust volume control setting. Memory dialing doesn’t work

•Make sure you program the memory location keys correctly .

•Make sure you follow proper dialing sequence .

Battery LOW indicator blinks or is solid

•The batteries need replacing or are not installed.

32

Image 32

Contents Model Important Information Equipment Approval InformationInterference Information LicensingHearing Aid Compatibility FCC RF Radiation Exposure StatementTable of Contents Telephone Operation Caller IDMemory General Product CareIntroduction IntroductionConnections and Setup InstallationParts Checklist Important Installation InformationBase Layout Vol +/- buttonsInstalling the Phone Snap the battery compartment door back into placeConnect the telephone line cords Attaching the Desktop Pedestal Data Port Wall Mounting the PhoneDisplay Language Manually Setting the Date and TimeProgramming the Telephone Flash Time Hour FormatCall Alert Tone Local Area CodeRegional Area Codes Voice Mail Access Codes Restoring the DefaultsTelephone Operation Telephone OperationMaking Calls with the Handset Making Calls with the SpeakerphoneSwitching Between the Speakerphone, Handset, and Headset Receiving Calls with the HandsetReceiving Calls with the Speakerphone Receiving Calls with the Optional HeadsetMute Call TimerPre-Dialing Telephone Numbers Volume HoldFlash RedialConference Do Not DisturbTo connect with two calls To keep both parties on-line but talk to one partyVoice Messaging Caller ID Caller ID CIDSummary Screen Receiving and Storing CID RecordsReviewing CID Records Saving CID Records to Memory/Phone Directory MemoryDeleting a CID Record Deleting All CID RecordsCall Waiting Caller ID Storing a Name and Number in Memory Direct Access Memory & Directory MemoryMemory Reviewing Stored Names & Numbers Changing a Stored Name or NumberStoring the Last Number Dialed Storing a PauseDialing a Stored Number Chain DialingDeleting All Directory Memory Deleting a One-Touch MemoryDeleting a Directory Memory Other Information Display MessagesTroubleshooting Guide General Product Care Warranty Assistance Thomson Inc Manager, Consumer Relations Box Indianapolis,Limited Warranty Limitation of Warranty How state law relates to this warrantyProduct Registration If you purchased your product outside the USAAccessory Information Index Index Thomson Inc