GE 28127 Series manual Deregistration, Global De-Registration, Default Setting

Deregistration

From the PHONE SETTING menu;

1.Use the or button to scroll to Deregistration.

2.Press the Select (SKL) button to enter the menu.

3.Use the or button to scroll to No or Yes. The default is No.

4.Press the Select (SKL) button to save your selection.

5.If you select Yes. The handset will automatically be deregistered. The screen displays Successful Deregistration, followed by HANDSET NEEDS REGISTRATION.

6.You must re-register the handset to main base through the handset using Phone Setting Registration menu before use.

Global De-Registration

If one or more handsets become lost, you should deregister all handsets to ensure proper system operation. Follow the steps below to deregister all handsets at the same time.

WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset’s telephone features cannot be used until the handset is re-registered.

NOTE: Before starting global deregistration procedure, let all handsets set idle for 20 seconds.

1.Disconnect the power from the base by unplugging the DC connector on back of base.

2.Press and hold the Page button on the base and reconnect the power.

3.Hold the Page button until the in use indicator flashes rapidly.

4.Release the Page button.

5.Press and release the Page button on the base once. All handsets are deregistered and the screen displays HANDSET NEEDS REGISTRATION.

Default Setting

This option allows you to return the handset to factory preset settings. From the Phone Setting menu:

1. Use the or button to scroll to Default Setting.

30