Handset does not ring
•Make sure the handset ringer switch is set to ON, this can be done through the handset setup menu - Ringer Volume.
•The handset may be out of range. Move closer to the base.
•You may have too many extension phones on your line. Try unplugging some phones.
•Check for dial tone.
You experience static, noise, or fading in and out
•The handset may be out of range of the base. Move closer to the base.
•Make sure base is not plugged into an outlet with another household appliance. If necessary, relocate the base.
•Charge the battery.
Unit beeps
•Clean charging contacts on cordless handset.
•See solutions for “No dial tone”.
•Replace the battery.
Memory Dialing doesn’t work
•Did you program the memory location keys correctly?
•Did you follow proper dialing sequence?
Unit locks up and there is no communication between the base and cordless handset
•Unplug the AC power adaptor from the wall outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and wall outlet. Reconnect the battery and charge for 16 hours.
Handset displays SEARCHING or OUT OF RANGE and cannot link up with the base when the TALK button is pressed.
•Handset may be out of range of the base. Move closer to the base.
•Make sure the power adaptor is properly installed.
•Disconnect the handset battery and plug it in again. Place the handset on the cradle for at least 2 to 3 minutes.
48