GE 28127 Series manual Caller ID CID, Mute, Ringer Volume Short-cut, Paging from the Base/Group

Paging from the Base/Group Page

Use the base-only to page all registered handsets at the same time.

1.Make sure the phone is OFF (not in talk mode).

2.Press the Page button on the base.

3.All registered handsets beep for two minutes and the screen displays PAGING.

4.To cancel the page, press the Page button on the base, or press any button on each handset.

Mute

To have a private, off-line conversation, use the mute feature. The party on the other end of the line cannot hear you, but you can still hear them.

When you are using the phone, press the MUTE button on handset to activate the mute function. The screen displays Mute On. To de-activate, press the MUTE button on handset again.

Ringer Volume (Short-cut)

There are two ways to set the ringer volume. One is via the handset menu as described in the section Programming the Telephone-->Sound Setting-->Ringer Volume, while the other one is this short-cut.

1.Make sure the phone is OFF (not in talk mode).

2.Press and hold the #PAUSE/ringer button until the screen displays the Ring Volume menu.

3.Use the or button to scroll to the desired ringer volume. The default is Volume 5.

4.Press the Select (SKL) button to save your selection. You will hear a confirmation tone.

Caller ID (CID)

IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service.

This unit receives and displays information transmitted by your local phone company.

40