GE 16223870 manual Installing the Phone

Page 11

INSTALLING THE PHONE

1.Choose an area near an electrical outlet and telephone wall jack (RJ11C).

2.Plug the AC power converter into an electrical outlet and the DC connector into the power jack on the back of the base.

CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2596 that came with this unit. Using other power supplies may damage the unit.

3. Install the handset battery in each handset.

NOTE: You must connect the handset battery before use.

•Push down on the top of the battery compartment cover (located on the back of the handset) and slide the cover off.

•Lift the battery pack and connect it's plug to the jack inside the compartment.

BATTERY

BLACK WIRE

PRESS DOWN
FIRMLY	RED WIRE

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration.

•Slide the battery compartment cover back into place.

4.Connect the telephone line cord by plugging one end of the telephone line cord into the jack on the back of the base and other end into a telephone wall jack.

NOTE: One base can support up to four handsets.

5.Place a handset in the base cradle. The charge/in use indicator turns on to indicate the battery is charging.

11

Image 11

Contents 21025 Hearing AID Compatibility HAC Equipment Approval InformationInterference Information FCC RF Exposure RequirementsTable of Contents Caller ID CID Introduction Page Handset Layout Base and Charge Cradle Layout Make sure your package includes the items shown here Before YOU BeginInstallation Installing the Phone Wall Mounting the Base Telephone SetupEnglish Setlanguage 1ENG 2FRA 3ESPAreacode SET AreacodeSET Ringer Tone 1 2 3 4 5 Ringer TONE-2OUT of Range SET Tone / Pulse Tone 2 PulseHandset Registered Handset Needs RegistrationHold Basepage Wait for Beep Move Near to Base DeregistrationHandset Deregistered Operation DefaultsettingDefaultsetting YES 1ON 2OFF Ringer onAnswering a Call Paging Extension ? Mute on Talk 0010 VolxPaging from Handset Paging HandsetIntercom Line on Hold Extension ?Call Back Transfer from HandsetSending Party Paging Pagingfrom HandsetHandset HANDSET1 PAGING/LINEONHOLDMemory Enter Name Enter Telnumbr Delete ? Peter ChanDeleted Caller ID CID Reviewing CID Records Replace MEMO? Dialing a CID Number Deleted Delete Call ID?No Calls Delete ALL ?Answering System SET UP Recording a personal announcement To erase a message while it is playing To erase all previously reviewed messages Security Code Security Code 1 2When you are playing a message, you may do the following Replay the current message Replacing the Battery Headset and Belt Clip Installation Enter Name Display MessagesConference Answering System Display Messages Handset Sound SignalsTroubleshooting Guide Page Caller ID Solutions Causes of Poor Reception General Product CareService Index SymbolsPage Limited Warranty Orderform Atlinks USA, Inc