GE 16223870 manual Handset Deregistered

Page 19

NOTE: Press the exit/answerer once to keep the previous setting and return to the main menu screen.

4.Press the mute/program button to confirm the deregistration. HANDSET

# DEREGISTERED shows in the display.

HANDSET 1

DEREGISTERED

GLOBAL DEREGISTRATION

If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation.

WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-registered.

1.Press and hold the base page button on the base until the charge indicator flashes.

2.Press and hold the base page button again until the charge indicator flashes rapidly.

3.Press and release the page button on the base. The charge indicator stops blinking, then the base returns to standby mode, and each handset displays HANDSET NEEDS REGISTRATION.

DEFAULT

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

1.Make sure your handset is in menu mode. Make sure your phone is OFF (not in TALK mode).

2.Press the mute/program button until DEFAULT SETTING 1YES 2NO shows in the display.

19

Image 19
Contents 21025 Hearing AID Compatibility HAC Equipment Approval InformationInterference Information FCC RF Exposure RequirementsTable of Contents Caller ID CID Introduction Page Handset Layout Base and Charge Cradle Layout Make sure your package includes the items shown here Before YOU BeginInstallation Installing the Phone Wall Mounting the Base Telephone SetupEnglish Setlanguage 1ENG 2FRA 3ESPAreacode SET AreacodeSET Ringer Tone 1 2 3 4 5 Ringer TONE-2OUT of Range SET Tone / Pulse Tone 2 PulseHold Basepage Wait for Beep Handset Needs RegistrationHandset Registered Move Near to Base DeregistrationHandset Deregistered Defaultsetting YES DefaultsettingOperation 1ON 2OFF Ringer onAnswering a Call Paging Extension ? Mute on Talk 0010 VolxPaging from Handset Paging HandsetIntercom Line on Hold Extension ?Call Back Transfer from HandsetSending Party Paging Pagingfrom HandsetHandset HANDSET1 PAGING/LINEONHOLDMemory Enter Name Enter Telnumbr Delete ? Peter ChanDeleted Caller ID CID Reviewing CID Records Replace MEMO? Dialing a CID Number Deleted Delete Call ID?No Calls Delete ALL ?Answering System SET UP Recording a personal announcement To erase a message while it is playing To erase all previously reviewed messages Security Code Security Code 1 2When you are playing a message, you may do the following Replay the current message Replacing the Battery Headset and Belt Clip Installation Enter Name Display MessagesConference Troubleshooting Guide Handset Sound SignalsAnswering System Display Messages Page Caller ID Solutions Causes of Poor Reception General Product CareService Index SymbolsPage Limited Warranty Orderform Atlinks USA, Inc