NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the talk button once. Switch back to speakerphone by pressing the speaker button once.
NOTE: Press the *tone button on the handset to exit room monitor mode.
Handset Setup
1.Make sure your phone is OFF (not in talk mode).
2.Press the menu ok/mute button to go to the main menu.
3.Press vol/CID ( 6 or 5) button to scroll to HANDSET SETUP.
4.Press the menu ok/mute button to confirm and you may program the following items: Set Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.
NOTE: During programming, you may press the end button at any time to exit the
Set Language
From the Handset Setup Menu:
1.Press the vol/CID ( 6 or 5) button to scroll to the SET LANGUAGE
2.Press the menu ok/mute button to enter the menu. SET LANGUAGE 41ENG 2FRA 3ESP shows in the display. The default setting is 1ENG.
3.Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the vol/CID ( 6 or 5) button to scroll to the desired language.
4.Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected language shows in the display.
Handset Name
From the Handset Setup Menu:
1.Press the vol/CID ( 6 or 5) button to scroll to the HANDSET NAME
2.Press the menu ok/mute button to enter the menu. HANDSET NAME shows in the display. The default setting is HANDSET #.
3.Use the
12