Area Code
From the Handset Setup Menu:
1.Press the vol/CID ( 6 or 5) button to scroll to the AREA CODE
2.Press the menu ok/mute button to enter the menu. SET AREA CODE - - - shows in the display. The default setting is - -
3.Use the
4.Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display.
NOTE: To restore the default setting to - -
Tone/Pulse
From the Handset Setup Menu:
1.Press the vol/CID ( 5 or 6) button to scroll to the TONE PULSE
2.Press the menu ok/mute button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”.
3.Use the
4.Press the menu ok/mute button to confirm. You will hear a confirmation tone and your selection shows in the display.
Registration
Your packaged handset(s) are
From the Handset Setup Menu:
1.Press the vol/CID ( 6 or 5) button to scroll to the REGISTRATION
2.Press the menu ok/mute button to enter the menu. REGISTRATION 1YES 42NO shows in the display. The default setting is 2NO.
3.Use the
4.If you select YES, press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.)
16