Adjusting the Fit
For optimal voice clarity, point the boom towards the corner of your mouth.
Correct Fit | Incorrect Fit |
How to Install a Different Gel Eartip
If the earpiece does not feel stable, the eartip needs adjusting or it may be the wrong size for your ear. The earpiece comes with the medium eartip installed, but you can replace it with the optional small or large eartip provided.
1 | 2 | 3 |
Eartip
Speaker housing
1Remove the earpiece from your ear.
Rotate the eartip on the earpiece to position the stabilizer to rest comfortably in your ear. If the earpiece still feels unstable, then remove the
2To remove the eartip, gently pull the stabilizer loop of eartip off of the speaker housing.
3To fit a new eartip, position the eartip over the speaker housing with the stabilizer pointed away from the microphone boom and gently press the eartip onto speaker housing.
| Earpiece Controls |
|
|
|
|
Turn on the earpiece | Press and hold the call control button for 2 |
|
| seconds until the indicator glows blue. If earpiece |
|
| flashes red 3 times when you turn on the earpiece |
|
| then the battery is very low and should be |
|
| recharged. |
|
| Note When your earpiece is in standby mode, the indicator |
|
| is off. To confirm that your earpiece is on, press any button. |
|
| You should see a blue light flash. |
|
|
|
|
Turn off the earpiece | Press and hold the call control button for 4 |
|
| seconds until the indicator glows red. When |
|
| power is off, indicator stays off. |
|
| note If you’re wearing the earpiece, you hear ascending |
|
| tones when the power turns on and descending tones when |
|
| the power turns off. |
|
|
|
|
Answer or reject | When your earpiece rings, tap the power button |
|
a call | once; you should hear 1 low tone. |
|
| To reject a call and send the caller to voice mail, |
|
| press the call control button for 2 seconds. |
|
| note Your phone may ring before your earpiece rings. |
|
| Wait until you hear the ring in your earpiece to press the call |
|
| control button and answer the call. |
|
|
|
|
End a call | During active call, tap the call control button. |
|
|
|
|
Make a call | When the earpiece is paired to your phone and in |
|
| range, enter phone number on your phone and |
|
| press send. The call automatically transfers to |
|
| your earpiece. |
|
|
|
|
Transfer a call | During an active call, press and hold the call |
|
between earpiece | control button for 2 seconds. You will hear a | en |
and phone | single low tone followed by a double low tone. | |
|
|
|
6 | 7 |