UK TROUBLESHOOTING
PROBLEM
Receive sounds distorted.
Possible Cause | Solution |
Listen volume too high | If your telephone has a receive volume control, lower |
on your telephone | this until the distortion disappears. |
| If the distortion is still present, lower the listen |
| volume control on the headset. If the distortion |
| persists, select another Rx Slide Switch setting. |
| (Refer to the Quickstart Guide). |
|
|
PROBLEM
I can hear too much background conversation, noise or sidetone.
Possible Cause | Solution |
Speak volume is too high | Lower the Speak Volume by adjusting the Speak |
| Volume control on the base unit. |
| If the volume is still too high, select another Tx Slide |
| Switch Setting (refer to the Quickstart Guide) |
|
|
PROBLEM
Sudden loss of audio, continuous noise or distorted audio on receive.
Possible Cause | Solution |
Software reset required | Press the Talk button (20) twice. |
| If the problem persists perform a System Reset |
| refer to instructions on page 11. |
|
|
PROBLEM
My handset Lifter operates every time I remove or replace my headset in the base unit.
Possible Cause | Solution |
IntelliStand™ function | To disable the IntelliStand function move the |
is enabled. | IntelliStand Switch to position I (Off). |
|
|
PROBLEM
Battery talktime performance is significantly degraded even after a full recharge.
Possible Cause | Solution |
Battery approaching | Replace with a new battery pack. |
end of life | Refer to the diagrams on page 3. |
|
|
10